Tuesday, September 27, 2022
HomeElectronicsESP32 Appears to be like Good In Pink - Information

ESP32 Appears to be like Good In Pink – Information


Hey everybody, and welcome again to a different Friday Product Publish right here at SparkFun Electronics! This week, we’ve two model new IoT boards so that you can try, the primary of which is our new USB-C model of our ESP32-WROOM Factor Plus. Because the identify implies, this board replaces the micro USB port on the board with a USB-C, it provides a microSD card slot, and it provides two new voltage regulators for higher energy use! Following that, we’ve a brand new Arduino R3 footprint IoT RedBoard outfitted with an ESP32-WROOM as nicely! Loads of the options which might be on the brand new Factor Plus this week. So, if an R3 model is extra your type, you will have choices. Teensy is up subsequent with 4.1 variations of the favored growth board, simply with out Ethernet. It is a easy change as a consequence of provide constraints, however you can choose up these new variations of the Teensy 4.1 with or with out headers. Lastly, we wrap the week with a brand new miniature through-hole speaker. Now, let’s bounce in and take a more in-depth take a look at all of this week’s new merchandise!

https://www.youtube.com/watch?v=g2MgO2fjqsw/

USB-C, microSD, and extra!

The SparkFun ESP32 WROOM Factor Plus with USB-C is a good place to get began with Espressif IoT ideations whereas nonetheless having fun with all of the facilities of the unique ESP32 WROOM Factor Plus. Espressif’s ESP32 WROOM is a robust WiFi and Bluetooth® MCU module that targets all kinds of purposes. On the core of this module is the ESP32-D0WDQ6 chip which is designed to be each scalable and adaptive. To make the Factor Plus as straightforward to make use of as doable, we have made the board Feather-compatible and it makes use of our useful Qwiic Join System which implies no soldering or shields are required to attach it to the remainder of your system!


https://www.youtube.com/watch?v=rI1Dr4__Gng/

Now you need to use an ESP32-WROOM in an Arduino R3 footprint!

The SparkFun IoT RedBoard is an ESP32 Improvement Board that features every part however the kitchen sink! Espressif’s ESP32 WROOM is a robust WiFi and Bluetooth® MCU module that targets all kinds of purposes. On the core of this module is the ESP32-D0WDQ6 chip which is designed to be each scalable and adaptive. The IoT RedBoard can goal all kinds of purposes, starting from low-power sensor networks to essentially the most demanding duties, reminiscent of voice encoding, music streaming, and MP3 decoding. The IoT ReadBoard additionally makes use of our useful Qwiic Join System which implies no soldering or shields are required to attach it to the remainder of your system!


The Teensy 4.1s (your alternative of with headers or with out them) are the latest iteration of the astoundingly in style growth platform that options an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, 4 instances bigger flash reminiscence than the 4.0, and two new places to optionally add extra reminiscence. The Teensy 4.1 is identical measurement and form because the Teensy 3.6 (2.4in by 0.7in), and gives larger I/O functionality, together with an SD card socket, and USB host port. Please understand that these Teensy 4.1 variations don’t have Ethernet capabilities.


Final up this week is that this small, 15mm spherical speaker that operates across the audible 2kHz vary. You should utilize these audio system to create easy music or consumer interfaces and is nice for initiatives the place you do not have room for a full-blown speaker.


That is it for this week. As at all times, we won’t wait to see what you make. Shoot us a tweet @sparkfun, or tell us on Instagram, Fb or LinkedIn. Please be secure on the market, be variety to 1 one other, and we’ll see you subsequent week with much more new merchandise!

By no means miss a brand new product!



RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular